|
Product Details:
|
| Name: | Bridgeport Digital Readout | Keyword: | Digital Linear Scale |
|---|---|---|---|
| Color: | White | Shell: | Aluminum |
| Display Resolution: | 0.1µm, 0.5µm, 1µm, 5µm | Application: | Milling, Lathe, Grinding, Boring, Wire Cut |
| Power: | 110V / 220V | Output Signal: | TTL |
| High Light: | Position 3 Axis Digital Readouts,Digital Readouts Systems For Lathe,Bridgeport Dro Digital Readouts |
||
Easson ES14 Full Function White 3 Axis Digital Readouts Systems For Machine Tool
Product Introduction
The ES-14 series is all in one function readout system series from Easson. In the ES-14 it is in fact possible to select the required Application( Milling, Lathe, Boring, Drilling, Grinding, Wirecut) directly during the DRO setup. It also provides right to the points application specific functions for various types of general and specialised machines to achieve the highest possible machining accuracy and efficiency.
The Autotex is used as the key membrance of ES series, it offer excellent chemical resistance to most commonly used industry solvent and excellent switch life, switch life of expected to be 100,000 times.
Ultra Low Temperature Rise Transformer
Easson all Digital readout system's power supply use a voltage switch linear power transformer and power filter, this can help our products pass by the noice immunity and the EMC.
To reduce the total heat generation inside the ES DRO in order to obtain long working life. An ultra low temperature rise transformer that construct with very high permeability icron core is used, which effectively bring temperature rise to only about 5℃.
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Aging Test
The Aging test can verify whether the process, design, material and other aspects are defective. Therefore, we can using this testing promptly revises the product design to improve product quality and service life.
Technical Specification
| Model Number | ES-14 | ||
| Axis number | 3 Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Output | TTL | ||
| Voltage Range | AC110 V - 220 V / 50Hz - 60Hz | ||
| Weight (kg) | 3.5 | ||
|
Input frequency |
2 MB Hz | ||
| Operation Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 3 optical linear scale | ||
| EMC Standard |
IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 |
||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Clear Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Inclined Machining |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
ES series DRO advanced Functions: Non-linear error compensation
Advanced functions for Milling machine
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow |
Contact Person: Tony
Tel: 86-15820566978
Fax: 86-756-7511215
