|
Product Details:
|
| Name: | Digital Position Readout | Keyword: | Digital Readout Display |
|---|---|---|---|
| Color: | Grey | Shell: | Aluminum |
| Display Resolution: | 0.1µm, 0.5µm, 1µm, 5µm | Application: | Milling, Lathe, Grinder, Boring, Wire Cut |
| Power: | 110V / 220V | Output Signal: | TTL |
| High Light: | Easson ES8A 3 Axis Digital Readouts,Digital Readouts Systems Linear Scale,Bridgeport Digital Readout |
||
Easson ES8A full function Grey 3 axis digital readouts systems Linear Scale
Product Introduction
The ES-8A series is all in one function readout system series from Easson. The principal design philosophy of ES-8A is to provide the highest noise immunity readout systems in the market. It also provides right to the points application specific functions for various types of general and specialised machines to achieve the highest possible machining accuracy and efficiency.
The Autotex is used as the key membrance of ES series, it offer excellent chemical resistance to most commonly used industry solvent and excellent switch life, switch life of expected to be 100,000 times.
Ultra Low Temperature Rise Transformer
Easson all Digital readout system's power supply use a voltage switch linear power transformer and power filter, this can help our products pass by the noice immunity and the EMC.
To reduce the total heat generation inside the ES DRO in order to obtain long working life. An ultra low temperature rise transformer that construct with very high permeability icron core is used, which effectively bring temperature rise to only about 5℃.
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Technical Specification
| Model Number | ES-8A | ||
| Axis number | Three Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Input | A / B quadrature signal | ||
| Voltage Range | AC110 V - 220 V / 50Hz - 60Hz | ||
| Weight (kg) | 3.5 | ||
|
Input frequency |
2 MB Hz | ||
| Operation Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 3 linear encoders | ||
| EMC Standard |
IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 |
||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Clear Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Inclined Machining |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
ES series DRO advanced Functions: Non-linear error compensation
Advanced functions for Milling machine
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow |
FAQs
Q1.How to send my enquiry?
You can contact us by email, phone call, message (Whats APP, We Chat, Skype).
Q2.How long can I get feedback after enquiry?
We will reply you within 1 hours in working day.
3. Q: Delivery time
A: Sea freight order normally is 30-45 days after receive the order comfirmation, small quantity for air freight is available to ship anytime.
4. Q: Payment term
A: Normal accept 100% T/T payment, for others payment terms, welcome to contact for discussion.
Contact Person: Tony
Tel: 86-15820566978
Fax: 86-756-7511215
